Skip to content
Front profile of NDS 6P06 6-inch white PVC sewer and drain cap with hub end, showing outer face and socket opening for solvent-weld.

NDS 6P06 6 in. PVC Sewer & Drain Cap, Hub End, Solvent-Weld

Brand: NDS
Save 25%
$24.27
$18.20
SKU 6P06
In Stock (73)

Notify me when back in stock

The NDS 6P06 is a 6 in. PVC Sewer & Drain (S&D) cap engineered to seal the end of 6-inch sewer and drainage pipelines. Constructed from heavy-duty PVC with a hub end, the cap installs with solvent-weld for a durable, watertight closure in non-pressurized underground systems.

  • Material & design: Heavy-duty PVC construction with a hub end for solvent-weld installation; molded white finish resists standard jobsite exposure.
  • Compatibility: Fits 6 in. sewer and drain pipe including SDR-35, SDR-26, triple-wall and pipes meeting ASTM D-2729/D-3034 standards; not compatible with Schedule 40 DWV.
  • Performance: For non-pressurized underground sewer and drainage applications; maximum working pressure 5 psi. Not for use in pressurized water systems.
  • Dimensions & fit: Designed for 6 in. hub connections (approx. 6.67 in ID × 6.3 in OD × 3.46 in H) to ensure a secure seating and proper alignment.
  • Applications: Caps or temporarily closes pipeline ends for new installations, site repairs, lateral lines and sewer mains; commonly used by contractors on civil drainage projects.
  • Standards & documentation: Meets applicable ASTM standards; manufacturer's technical datasheet and specification documents are available for installation details.

Built to offer a simple, reliable termination for 6-inch S&D pipelines, the NDS 6P06 provides a quick, watertight solution when installed with the proper primer and solvent cement. Refer to the manufacturer's specification sheet and local code requirements for full installation instructions, recommended materials, and compatibility tables.

Reviews

Frequently Asked Questions

What pipes does the NDS 6P06 fit?
Fits 6 in. sewer and drain pipe including SDR-35, SDR-26, triple-wall and pipes meeting ASTM D-2729/D-3034 standards.
How should I install the 6P06 cap?
Install by solvent-weld to the hub end: clean, prime, and apply approved PVC cement per the manufacturer's instructions and local code.
Is the NDS 6P06 suitable for pressurized systems?
No. It is intended for non-pressurized underground sewer and drainage use only. Maximum working pressure is 5 psi.
What are the cap's approximate dimensions?
Approx. 6.67 in inside diameter × 6.3 in outside diameter × 3.46 in height; designed to seat on standard 6 in. hub connections.