Skip to content
Irritrol 2713DPR 1-inch electric anti-siphon irrigation valve with threaded bonnet, 24 VAC solenoid and flow-control knob

Irritrol 2713DPR 1 in. Electric Anti-Siphon Valve, Threaded Bonnet

Brand: Irritrol
Save 27%
$43.61
$31.62
SKU 2713DPR
In Stock (20)

Notify me when back in stock

The Irritrol 2713DPR is a 1 in. electric anti-siphon irrigation valve from Irritrol’s 2700 Series, engineered for dependable residential water control. It pairs a threaded (DPR) bonnet for fast servicing with a built-in atmospheric vacuum breaker and a tamper-resistant flow-control mechanism for precise zone balancing and back-siphon protection.

  • 1 in. NPT threaded connection: DPR (jar-top) design allows servicing without line removal.
  • Reliable electrical operation: 24 VAC solenoid with low holding current for common irrigation controllers.
  • Wide operating range: Flow range 0.25–30 GPM and pressure rating 10–150 PSI for typical residential systems.
  • Durable construction: Full stainless-steel metering system (DPR models) and rugged SANTOPRENE diaphragm for long service life.
  • Precise flow control: Patented, tamper-resistant flow-control and manual shutoff for easy on-site adjustment.
  • Certifications & warranty: ASSE, IAPMO and CSA listings plus a 5-year limited warranty for added peace of mind.

Dimensions for the 2713 family: H: 6" × W: 3" × L: 6 7/8" (verify model-specific dimensions in the installation guide). The valve includes internal and external bleed (flush mode) and is intended for above-ground installation — maintain at least 6 in. clearance above the highest downstream outlet to ensure proper anti-siphon performance. Review the included sell sheet and installation guide for wiring diagrams, friction-loss data, and local code requirements.

Reviews

Frequently Asked Questions

What voltage does the 2713DPR solenoid require?
The solenoid requires 24 VAC; inrush ~0.4 A (9.6 VA) and holding ~0.2 A (4.8 VA) for compatibility with standard controllers.
What are the flow and pressure ranges for this valve?
This model supports approximately 0.25–30 GPM and an operating pressure range of 10–150 PSI, suitable for most residential systems.
Can the valve be serviced without removing it from the line?
Yes. The DPR threaded bonnet (jar-top) design allows bonnet removal and servicing without removing the valve from the piping.
Where can I install an anti-siphon valve like this?
Install above ground only, at least 6 in. above the highest downstream outlet; do not install the valve in a valve box or below ground level.