Skip to content

Filters

PVC Pipe Fittings

Whether you’re a lawn irrigation specialist or more of a DIY sprinkler type, you know what you need to keep your residential or commercial sprinkler system running properly. The absolute lifeblood is your water delivery - the pipes that send water from your valve through to each and every one of your sprinkler heads. Not only that, but you need the right fittings for these as well. The industry standard for all types of irrigation, both fitting and pipe, has been polyvinyl chloride, or PVC, for a very long time. PVC pipes are rugged, durable, and safe, perfect for burying in the ground. 

There are two types of PVC pipe that are used in irrigation. First, there’s  a flexible type, typically made from a dark-colored plastic that is thin-walled and is easy to shape into gentle curves. This is especially useful when working with large, multiple-zone irrigation systems across wide swathes of landscape. Flexible PVC pipe is also easy to cut into in order to install sprinkler heads, requiring little more than a pair of pipecutters, a metal ring, and a metal crimping tool. Because it’s so thin-walled, though, it’s best to use them for irrigation only during the summer and then winterize them over the winter months. This prevents damage from frozen water expansion.    

While flexible pipe is used primarily to run water from your manifold to your sprinkler heads, rigid PVC is for high-volume or high-pressure applications. This hard, thick-walled plastic also comes in dozens of different diameters, is sturdy enough to drill holes in it with a specialized drill bit, and joining these pipes together requires a special PVC cement that creates a tight seal in minutes. Its versatility makes it perfect for indoor and outdoor plumbing in both the summer and winter as well as for irrigation. In fact, there are probably connectors of this type in your home right now leading to an outdoor hose or hose connector, your sewer or septic tank, and, of course, your sprinkler manifold from your main water source. This type of plastic is also much more durable than the flexible variety, though both can be susceptible to damage from freezing.

Can’t find what you need elsewhere? Try us! We’re your one-stop shop for everything you need to keep your PVC sprinklers up and running like a charm. And not just because we have a wide selection of different lengths and diameters, either - we’ve got all the varied parts you’ll ever need to keep your system connected. Our huge inventory includes everything you need to get the job done, including:

  • Couplings
  • Tees
  • Elbows
  • Crosses
  • Bushings
  • Adapters
  • Caps and Plugs
  • Nipples and Risers
  • Ball Valves

And that’s just the tip of the iceberg! We’re here to answer all your questions, either at the other end of a phone or an email address. Contact us today and see how we can get you the parts you need!

    PVC Couplings
    PVC Couplings
    PVC Tees
    PVC Tees
    PVC Elbows
    PVC Elbows
    PVC Crosses
    PVC Crosses
    PVC Bushings
    PVC Bushings
    PVC Male Female Adapters
    PVC Male Female Adapters
    PVC Caps and Plugs
    PVC Caps and Plugs
    PVC Schedule 40 Unions
    PVC Schedule 40 Unions
    PVC Nipples and Risers
    PVC Nipples and Risers
    PVC Ball Valves
    PVC Ball Valves
    • Side view of HMIP100SE 1" PVC Schedule 80 slip ball valve highlighting PVC ball housing, EPDM seat area, and red ABS lever handle for manual operation.
      Front angle view of HMIP100SE 1" PVC Schedule 80 slip ball valve showing white PVC body, red lever handle, and 1-inch socket ends for installation.
      Save 25%
      $8.41
      $6.31
      American Granby, Inc

      HMIP100SE PVC Schedule 80 Slip Ball Valve - 1"

      In Stock (39)

      The HMIP100SE is a 1" Schedule 80 PVC molded-in-place slip x slip ball valve designed for irrigation, pool, and general plumbing applications. The ...

      View full details
      $8.41
      $6.31
      Save 25%
      In Stock (39)
    • Angled view of DURA 335-010 gray PVC swivel x insert adapter showing 1" insert barb and female swivel connection, Schedule 40 finish.
      Save 25%
      $9.36
      $7.02
      DURA

      DURA 335-010 1" Swivel x 1" Insert Adapter

      In Stock (31)

      Compact manifold insert adapter engineered for easy, tool-free manifold assembly and quick valve servicing. The DURA 335-010 is a gray PVC Schedule...

      View full details
      $9.36
      $7.02
      Save 25%
      In Stock (31)
    • Front view of Dura 329-011 1-inch gray Schedule 40 PVC O-ring coupling with swivel nut and slip spigot, showing connection ends clearly.
      Save 25%
      $9.84
      $7.38
      DURA

      Dura 329-011 O-Ring Coupling 1" Slip x Swivel

      In Stock (57)

      Dura 329-011 is a 1" O-ring sealed coupling designed for manifold and irrigation systems. Manufactured from Schedule 40 PVC with a gray finish, thi...

      View full details
      $9.84
      $7.38
      Save 25%
      In Stock (57)
    • PVC male reducing adapter 1" MIPT to 3/4" slip on white background, front-angle view showing threaded inlet and slip outlet (part 436131).
      Save 25%
      from $3.94
      from $2.96
      PVC

      PVC Male Reducing Adapter 1" MIPT x 3/4" Slip

      In Stock (154)

      PVC Male Reducing Adapter — part 436131 — provides a dependable transition from a 1" male threaded inlet to a 3/4" slip outlet. Designed for irriga...

      View full details
      from $3.94
      from $2.96
      Save 25%
      In Stock (154)