M481-007 - 3/4 in. x 6 in. Poly Cut-Off Riser
Poly Riser 3/4 in. x 6 in. Cut-off
Whether you’re a lawn irrigation specialist or more of a DIY sprinkler type, you know what you need to keep your residential or commercial sprinkler system running properly. The absolute lifeblood is your water delivery - the pipes that send water from your valve through to each and every one of your sprinkler heads. Not only that, but you need the right fittings for these as well. The industry standard for all types of irrigation, both fitting and pipe, has been polyvinyl chloride, or PVC, for a very long time. PVC pipes are rugged, durable, and safe, perfect for burying in the ground.
There are two types of PVC pipe that are used in irrigation. First, there’s a flexible type, typically made from a dark-colored plastic that is thin-walled and is easy to shape into gentle curves. This is especially useful when working with large, multiple-zone irrigation systems across wide swathes of landscape. Flexible PVC pipe is also easy to cut into in order to install sprinkler heads, requiring little more than a pair of pipecutters, a metal ring, and a metal crimping tool. Because it’s so thin-walled, though, it’s best to use them for irrigation only during the summer and then winterize them over the winter months. This prevents damage from frozen water expansion.
While flexible pipe is used primarily to run water from your manifold to your sprinkler heads, rigid PVC is for high-volume or high-pressure applications. This hard, thick-walled plastic also comes in dozens of different diameters, is sturdy enough to drill holes in it with a specialized drill bit, and joining these pipes together requires a special PVC cement that creates a tight seal in minutes. Its versatility makes it perfect for indoor and outdoor plumbing in both the summer and winter as well as for irrigation. In fact, there are probably connectors of this type in your home right now leading to an outdoor hose or hose connector, your sewer or septic tank, and, of course, your sprinkler manifold from your main water source. This type of plastic is also much more durable than the flexible variety, though both can be susceptible to damage from freezing.
Can’t find what you need elsewhere? Try us! We’re your one-stop shop for everything you need to keep your PVC sprinklers up and running like a charm. And not just because we have a wide selection of different lengths and diameters, either - we’ve got all the varied parts you’ll ever need to keep your system connected. Our huge inventory includes everything you need to get the job done, including:
And that’s just the tip of the iceberg! We’re here to answer all your questions, either at the other end of a phone or an email address. Contact us today and see how we can get you the parts you need!
Poly Riser 3/4 in. x 6 in. Cut-off
Pipe Riser Extender 3/4" FIPT x MIPT Poly
Poly Riser 1/2 in. x 6 in. Cut-off
O-Ring Tee Swivel x Mipt x Swivel 1 x 1 x 1 Manifold System Components are O-Ring Sealed, do not use paste, dope or Teflon tape. Fitting is Manuf...
View full details90° Elbow PVC 1" Slip x Slip
Cap PVC Threaded 1/2" FIPT
Coupling Threaded PVC 3/4" FIPT x FIPT
Reducer Bushing PVC Threaded 3/4" x 1/2" MIPT x FIPT
Slip Tee 1" SxSxS
Coupling 1" Slip
Coupling Threaded PVC 1/2" FIPT x FIPT
Dura Manifold Nipple w/O-ring 1 in.
O-ring Elbow Mipt x Swivel 1" x 1" Manifold System Components are O-Ring Sealed, do not use paste, dope or Teflon tape. Fitting is Manufactured S...
View full detailsNipple Sch 80 1/2" x Close Threaded Both Ends
Pipe Riser Extender 1/2" FIPT x MIPT Poly
90° Elbow PVC 3/4" Slip x Slip
Poly Riser 3/4 in. x 1/2 in. x 6 in. Cut-off
O-ring Elbow Swivel x Swivel 1" x 1" Manifold System Components are O-Ring Sealed, do not use paste, dope or Teflon tape. Fitting is Manufactured...
View full detailsSlip Tee 3/4" SxSxS
Nipple Sch 80 1/2" x 2" Threaded Both Ends
Cap PVC Threaded 3/4" FIPT
Nipple 1/2" x 3/4" MIPT Threaded Both Ends
Coupling 3/4" Slip
Nipple Sch 80 1/2" x Close Threaded Both Ends