Skip to content
Rain Bird 100DVSS 1-inch slip x slip electric irrigation valve front angle view showing solenoid and bonnet, durable plastic body.

Rain Bird 100DVSS 1 in. Slip x Slip Electric Valve

Brand: Rain Bird
Save 28%
$34.46
$24.98
SKU 100DVSS
In Stock (931)

Notify me when back in stock

Rain Bird 100DVSS is a 1 in. slip-by-slip remote-control electric irrigation valve built for dependable residential and light-commercial performance. Engineered for long life, the DV series uses a balanced Buna‑N diaphragm and double-filtered pilot flow to reduce debris-related failure and water hammer.

  • 1 in. slip x slip inlet/outlet configuration for solvent-weld installations; compact inline design for tight spaces.
  • Operating pressure 15–150 PSI and flow range 0.2–40 GPM, suitable for most residential irrigation zones.
  • 24 VAC 50/60 Hz encapsulated solenoid; typical inrush 0.30 A (7.2 VA) and holding 0.23 A (5.5 VA); coil resistance ~38 Ω.
  • Durable plastic/PVC body with glass-filled components and stainless steel fasteners for corrosion resistance.
  • Balanced pressure Buna‑N diaphragm with 90‑mesh (200 micron) pilot filter plus external and internal bleed ports for easy flushing and spray‑free manual operation.
  • Accepts latching solenoids and is compatible with common sprinkler timers and Rain Bird battery-operated controllers when using the correct latching solenoid.

Includes proven serviceability features—four captured bonnet screws, removable solenoid, and accessible filters—so routine maintenance is fast. Use a 200‑mesh upstream filter for low‑flow or drip applications. Refer to official Rain Bird product literature for detailed performance curves, installation diagrams, and pressure‑loss charts.

Reviews

Frequently Asked Questions

What voltage and power does the 100DVSS solenoid require?
The 100DVSS uses a 24 VAC solenoid; typical inrush is about 0.30 A (7.2 VA) and holding current about 0.23 A (5.5 VA).
Is the 100DVSS suitable for low-flow drip or Xerigation systems?
For flows below 3 GPM or landscape drip, Rain Bird recommends installing a 200‑mesh filter upstream to prevent clogging.
What are the operating pressure and flow ranges for this valve?
Operating pressure is 15–150 PSI with a flow range of approximately 0.2–40 GPM depending on model and configuration.
Can I service the valve in the field and replace the solenoid?
Yes. The design includes captured bonnet screws, an accessible solenoid and internal filters for easy field servicing and fast maintenance.

Add a FREE Pair of Gloves to Your Order

Spend $35+ Add a FREE Pair of Gloves to Your Order Select Your Size