Skip to content

Toro T5 Rotors

The new Toro T5 Series Rotor has the features to satisfy all your basic irrigation needs while surprising you with a few extras.
In the same size body as competitive units with only a 4" pop-up, the new T5 delivers a full 5 inches (12.7 cm) of pop-up height. Part and full-circle arc are all in one sprinkler with a quick and easy top adjustment feature allowing arc sets between 40 and 360 degrees. The nozzle tree offers standard angles, plus a low angle set. Both offer a wide selection of flows.
Nozzles are balanced allowing for the use of any nozzle on the same zone where different arcs are being irrigated at the same time. This multi-purpose rotor packs a lot of convenience into one competitively priced unit. For those day-in and day-out installations, the T5 is the only rotor you'll need.
Standard Rubber Cover
The top of the sprinkler is covered with a heavy duty rubber cover to minimize impact injuries and reduce liability.
Nozzle Tree
The T5 comes with a full nozzle tree of 8 standard nozzles (25Ā°) and 4 low angle nozzles (10Ā°).
Optional Check Valve
Available with a hold back strength of 7 feet (2,1m) of elevation change.
Top Adjust Arc Set
The T5 can be set between a minimum arc set of 40Ā° and a full circle set of 360Ā°. Arc changes are made from the top of the sprinkler while popped up or down by using a small slotted screwdriver.
5" (127mm) Pop-Up
Easily replaces many competitive 4" (100mm) units in the same footprint but delivers an extra inch of pop-up.

Ā 

Radius 25'-50' (7.6 - 15.2 m)
Flow 0.76-9.63 GPM (2.9 - 36.5 LPM)
Arc Full Circle; Part-circle Adjustable; Part/Full circle in One
Recommended Operating Pressure 25-70 PSI (1.7 - 4.8 BAR)
Inlet 3/4" (1.9 cm)
Pop-Up Height 5" (12.7 cm)
Body Height 7 1/2" (19 cm)
Cap Diameter 2 5/8" (6.7 cm)