11003CV - PROPlus 5 inch Adj Arc Rotor w/ Check Valve
K-rain Pro Plus W/ Check Valve Inlet: 3/4" threaded NPT Arc Adjustment Range: 40 to continuous 360 Flow Range: 0.5 - 10.0 GPM Pressure Rating: 20-...
View full detailsK-rain Pro Plus W/ Check Valve Inlet: 3/4" threaded NPT Arc Adjustment Range: 40 to continuous 360 Flow Range: 0.5 - 10.0 GPM Pressure Rating: 20-...
View full details• Extends to 58 inches to cover large spray areas • 43-ft. spray distance; 5,800 square feet • Adjustable collar for partial- to full-circle cover...
View full detailsThis product combines the function of a drip flush valve, with a highly visible pop-up nozzle (orange or purple) to give maintenance persons a vis...
View full detailsFits nearly all existing sprinkler stems. Check valve included. Turn an existing spray body into a drip irrigation outlet when adjusted to 30/40 p...
View full detailsHunter - 120300 - Adjustment Screw Holds the nozzle in place Caution: Turning the adjustment screw clockwise more than five full turns may result ...
View full detailsFor All Hunter Rotor Models EXCEPT: I-90, I-60, and PGJ
Standard PGP Nozzle Rack Red For PGP-ADJ The PGP® is Hunter’s original product—the item that put the company on the map in 1981. Its exceptional ...
View full detailsFits PGP-ADJ, PGP Ultra, and I-20 sprinklers Includes the standard black filter screen Includes rubber check valve assembly Easily fits into the b...
View full detailsRotor Adjustment Wrench Fits ALL Hunter Rotors
Replacement set screw for Hunter PGP ULTRA and I-20 rotor.
PGP Riser Seal Replaces Part 253400 Special Note From Our Service Tech:Virtually 100% of the usage of this part is for the replacement of the sea...
View full detailsMade of high-quality materials Durable and long-lasting construction Easy to install Hunter parts provide a painless and affordable way to...
View full detailsHunter - 222700 - Sub-Surface Stabilizer Flange For use with I-25-04, I-25-06, I-35, I-40-04 and I-40-06 gear driven sprinklers.
Hunter - 233200 - Low Angle Nozzle Set for PGP Series Low angle water trajectory - 13 degrees With the ability to deliver even water distribution...
View full detailsHunter - 235000 - Check Valve Spring For the I20 Gear Driven Sprinkler
Hunter - 269400 - Replacement Rubber Top for PGP Series Replaces factory installed rubber top For PGP series rotors
Hunter - 280100 - Rotor Pitot Gauge and Tube Assembly Easy to use design Use on any Hunter rotor or those by other manufacturers
Hunter - 352476 - I-20 Rubber Top Black top replaces factory installed ones For use with I-20 Rotors Series Replaced Hunter 352400
Hunter - 356605 - I-20 Nozzle Set For I-20 Rotors Numbers on nozzles represent flow rates With 34 nozzle choices, a 17’ to 46’ radius, and 6 body...
View full detailsSpecifically for Hunter Pro-Spray heads only. Does not work with any other model of spray sprinkler. Eliminates low-head drainage at sprinklers ...
View full detailsFor use with PGP Ultra & I-20 Rotor Series High Flow & Low Angle #10, #13 Standard High Flow #6, #8 Low Angle High Flow Documents: PGP...
View full detailsHunter - 458520 - Reclaimed Water Identification Caps For the Pro Spray product line Can be easily screwed into place before or after installation...
View full detailsHunter 5 Standard Nozzle Set for I-25 Ultra Rotors: Nozzles are color-coded. Each standard nozzle has a number engraved on the outer surface. The n...
View full detailsHunter - 461204 - I-90 Nozzle Set Nozzle Pack (1 Ea 25, 33, 38, 43, 48, 53, 63, 73) The I-90 is offered in two models: a full-circle opposing-noz...
View full details