Skip to content
Angled view of Hunter FCT-200 2" Schedule 40 PVC flow sensor receptacle tee showing slip x slip connections and sensor pocket for Flow-Clik.

Hunter FCT-200 2" Schedule 40 Flow-Clik Sensor Tee

Brand: Hunter
Save 28%
$164.74
$119.43
SKU FCT200
In Stock (3)

Notify me when back in stock

The Hunter FCT-200 is a Schedule 40, 2" (50 mm) sensor receptacle tee engineered to accept Hunter Flow‑Clik / Flow‑Sync sensors and integrate flow monitoring into mainline irrigation systems. The FCT-200 installs inline and provides a protected pocket for the sensor while maintaining full flow through the mainline.

  • Pipe & connection: Fits 2" (50 mm) Schedule 40 pipe; slip x slip solvent-weld (glue) connections for PVC installation.
  • Sensor compatibility: Designed to house Hunter Flow‑Clik (Flow‑Sync) sensors — sensor and programming module sold separately.
  • Dimensions & clearances: Height 6" (15 cm); width 2.7" (7 cm); length 4.7" (14 cm). Require 20" (50 cm) straight pipe upstream and 10" (25 cm) downstream for accurate readings.
  • Flow guidance: 2" sensor applications: minimum ~10 GPM, suggested maximum ~55 GPM (based on Class 200 IPS pipe); observe recommended max velocity design practices.
  • Durability & design: Schedule 40 PVC construction in white finish with a recessed sensor pocket for secure installation and straightforward maintenance.
  • Installation tip: Use approved PVC solvent-weld glue and avoid excess uncured glue in the sensor pocket, and add a filter upstream on non-public water supplies to protect the sensor impeller.

The FCT-200 tee enables reliable flow monitoring and high-flow shutdown when used with a Flow‑Clik sensor and controller. Consult the included product manuals and cutsheets for complete installation diagrams, electrical wiring limits, and calibration guidance before fitting. The receptacle tee ships as the plumbing body only; order the Flow‑Clik sensor separately if you require a complete flow-detection system.

Reviews

Frequently Asked Questions

What pipe size and connection does the FCT-200 use?
Fits 2" (50 mm) Schedule 40 pipe with slip (solvent-weld) x slip connections for PVC installation.
Does the Flow‑Clik sensor come with the FCT-200 tee?
No. The FCT-200 is the receptacle tee only; the Flow‑Clik sensor and programming module are sold separately.
How much straight pipe is required upstream and downstream?
Provide 20" (50 cm) of straight pipe upstream and 10" (25 cm) downstream for accurate sensor readings.
What flow range is appropriate for the 2" sensor installation?
The 2" sensor is suitable for roughly 10 GPM minimum and a suggested maximum of about 55 GPM (based on Class 200 IPS pipe).