Skip to content
Front view of Hunter Flow-Clik kit: flow sensor and interface module for 24 VAC controllers; FCT fitting required.

Hunter Flow-Clik Flow Sensor Standard Kit for 24 VAC Controllers

Brand: Hunter
Save 27%
$533.79
$387.00
SKU FLOWCLIK

Notify me when back in stock

Protect landscapes and irrigation systems from hidden leaks with the Hunter Flow-Clik standard kit. Designed for 24 VAC controllers, this kit automatically shuts down irrigation when measured flow exceeds a programmed threshold—reducing water waste, flooding, and erosion.

  • What's included: Flow-Clik sensor and interface module for 24 VAC controllers; interface provides easy wiring to the controller.
  • Pipe fittings required: Sensor requires an FCT T-fitting (sold separately). Common FCT options: FCT-100, FCT-150, FCT-158, FCT-200, FCT-208, FCT-300, FCT-308, FCT-400.
  • Programmable controls: One-button calibration to set expected zone flow, programmable start-up delay (0–300 seconds) and interrupt period (5–60 minutes).
  • Status & calibration: Multicolor LED system status indicator and single-button calibration for fast setup.
  • Electrical & wiring: Operates on 24 VAC at 0.025 A draw, 2 A switching capacity; sensor wiring supported to 300 m (≈1000 ft) using appropriate gauge (≥18 AWG).
  • Durability & warranty: Built for irrigation environments with recommended pressure and temperature ranges; backed by a 5-year Hunter warranty.

Installation requires basic irrigation plumbing and low-voltage wiring. Use the Flow-Clik Owner's Manual for detailed mounting, wiring, and calibration instructions. The Flow-Clik standard kit is compatible with most Hunter and many non-Hunter 24 VAC controllers; select the correct FCT sensor body for your pipe schedule and size.

Reviews

Frequently Asked Questions

What controllers are compatible with the Flow‑Clik kit?
The Flow‑Clik standard kit works with any 24 VAC irrigation controller; compatible with most Hunter and many non‑Hunter controllers.
Does the kit include the pipe sensor body?
No. The kit includes the sensor and interface module only; FCT T‑fitting sensor bodies are sold separately and must match your pipe size.
How do I program the Flow‑Clik sensor and what settings exist?
Use the one‑button calibration to set the highest expected zone flow. Adjustable start delay (0–300s) and interrupt period (5–60 minutes) control response.
What wiring and installation limits should I observe?
Use two low‑voltage wires to the sensor; runs supported up to 300 m (≈1000 ft) with proper gauge (≥18 AWG). Follow the manual for mounting and calibration.