Skip to content
Wilkins 227N O-Ring — 1-Inch Housing Inlet for 375

Wilkins 227N O-Ring — 1-Inch Housing Inlet for 375

Brand: Zurn Industries, LLC
Save 25%
$26.25
$19.69
SKU 227N
In Stock (4)

Notify me when back in stock

Replacement O‑ring designed for Wilkins model 375 backflow assemblies with a 1" housing inlet. This part corresponds to part number 227N and provides a tight sealing surface at the housing inlet to help protect the assembly from leaks and maintain reliable performance during routine operation.

  • Exact fit: Intended for the Wilkins 375 series housing inlet with a 1" connection; confirm part number 227N before installation.
  • Function: Creates a pressure-tight seal at the inlet to prevent water bypass and maintain correct backflow prevention operation.
  • Installation guidance: Replace any worn or cracked O‑ring during routine service intervals; inspect the housing seat and groove for debris or damage before installing.
  • Service considerations: Use a compatible lubricant (silicone-based recommended) to ease installation and avoid damage; do not use petroleum-based lubricants unless manufacturer approves.
  • Compatibility check: Verify match by comparing the part number and the 1" housing inlet measurement to your existing component.

This listing reflects the part identification provided (Wilkins 227N). Material composition and manufacturer warranty details are set by the original equipment manufacturer; if you require confirmation of elastomer type, shelf life, or OEM warranty coverage, contact the Wilkins/Zurn technical support or consult the product catalog before ordering. For safe replacement: shut off and depressurize the system, carefully disassemble the housing, remove the old O‑ring, clean the sealing surfaces, fit the new O‑ring with appropriate lubricant, and reassemble. If you are unsure about any step, consult a licensed plumber or certified backflow technician.

Reviews

Frequently Asked Questions

What models does this O‑ring fit?
This O‑ring corresponds to part number 227N and is intended for Wilkins model 375 with a 1" housing inlet; verify before ordering.
How should I replace the housing inlet O‑ring?
Shut off and depressurize the system, remove the housing cap, inspect surfaces, fit the new O‑ring with silicone lubricant, and reassemble.
Is this an OEM Wilkins part?
The listing uses part number 227N associated with Wilkins/Zurn; check the manufacturer catalog or label for definitive OEM confirmation.

Add a FREE Pair of Gloves to Your Order

Spend $35+ Add a FREE Pair of Gloves to Your Order Select Your Size