Skip to content
Rain Bird SMRT-Y Soil Moisture Sensor - Controller Interface & Probe

Rain Bird SMRT-Y Soil Moisture Sensor - Controller Interface & Probe

Brand: Rain Bird
Sold out
$304.83
$221.00
SKU SMRT-Y

Notify me when back in stock

The Rain Bird SMRT-Y Soil Moisture Sensor kit converts a standard irrigation controller into a closed-loop, water-saving system. Using a digital TDT probe and a compact controller interface, the SMRT-Y measures soil volumetric moisture, soil temperature and electrical conductivity (EC) to suspend or allow scheduled watering and reduce overwatering.

  • Digital TDT in-ground probe provides precise volumetric water content readings independent of soil temperature and salinity (EC).
  • Displays soil moisture (0–100%), soil temperature (°F/°C) and EC on a touchpad LCD; seven-cycle watering history is saved.
  • Automatic moisture-threshold setup with manual increase/decrease and a sensor bypass key for easy deactivation.
  • Corrosion-resistant in-ground probe manufactured from high-grade 304 stainless steel for long outdoors service; designed to be “bury-and-forget” with no calibration needed.
  • Sampling every 10 minutes and suspends scheduled cycles when the measured moisture is above threshold, delivering typical water savings over 40%.
  • Includes controller interface, in-ground sensor, anodized stainless screws, wire nuts and multilingual manual for straightforward installation.

The compact controller interface measures 3.0" (76 mm) wide × 3.0" (76 mm) high × 0.75" (19 mm) deep. The in-ground probe measures approximately 2.0" (50 mm) wide × 8.0" (200 mm) long with 18 AWG leads about 42" (107 cm) long. Operating power is supplied by the controller (25 VAC at 12 W); operating temperature range is -4°F to 158°F (-20°C to 70°C) with survival ratings to -40°F to 185°F (-40°C to 85°C). The SMRT-Y kit is compatible with most standard irrigation controllers and can isolate up to two independent zones from sensor control when required. Refer to the included technical specs and manual for wiring diagrams, threshold-setting procedures and recommended probe placement depths.

Reviews

Frequently Asked Questions

What measurements does the SMRT-Y soil moisture sensor display?
It displays volumetric soil moisture (0–100%), soil temperature (°F/°C) and electrical conductivity (EC). Readings update every 10 minutes.
How is the SMRT-Y installed and connected to a controller?
The in-ground probe is buried and wired to the controller interface using existing valve wiring or a common wire. Kit includes wire nuts and mounting screws.
Can specific irrigation zones be isolated from the sensor?
Yes. Up to two independent zones can be isolated or bypassed so other zones run normal schedules while the sensor controls targeted areas.

Add a FREE Pair of Gloves to Your Order

Spend $35+ Add a FREE Pair of Gloves to Your Order Select Your Size