18/12 x 250 ft Irrigation Control Wire - 18 AWG, 12-Conductor

18/12 x 250 ft irrigation control cable engineered for multi-zone sprinkler and drip systems. This 12-conductor, 18 AWG spool combines PVC-insulated conductors with a durable polyethylene jacket and nylon rip cord so you can unspool and route cable for controller-to-valve runs with confidence.

• 12 conductors, 18 AWG: Multi-conductor spool simplifies wiring for 6–12 station controllers and zone valve runs.
• PVC insulation: Each conductor is insulated with PVC for abrasion and moisture resistance during installation.
• Polyethylene jacket with nylon rip cord: Tough outer jacket resists soil friction; rip cord speeds jacket removal for clean terminations.
• Underground, direct-burial rated: Built for buried low-energy irrigation control circuits—no separate conduit needed when installed per local code.
• 250 ft spool: Generous length for residential and light-commercial runs—cut to the lengths you need.
• Easy to terminate: Works with common waterproof wire connectors, terminal blocks, and irrigation valve screws.

Use this cable for standard irrigation controller installations, valve leads, and remote solenoid wiring. When splicing, follow best practices: use waterproof connectors or gel-filled splice kits, protect exposed terminations with heat-shrink or silicone sealant, and follow local electrical and irrigation codes. For long controller-to-valve distances consider voltage drop and plan common wire routing accordingly.