Skip to content

Filters

Rain Bird DV/DV-F Series Valves

Plastic Residential Irrigation Valves.
Rain Bird manufactures only the highest quality valves. Use DV/DVF series valves in locations where the use of a separate pressure vacuum breaker (PVB) or a double-check valve is required by city codes to protect against back flow. Check your local city codes to determine what type of valves are required.
  • Double-filtered pilot-flow design for maximum reliability. 
  • Balanced-pressure diaphragm for long life. 
  • External bleed to manually flush system of dirt and debris during installation and system start-up. 
  • Internal bleed for spray-free manual operation. 
  • Energy-efficient, low-power encapsulated solenoid with captured plunger and 90-mesh (200 micron) solenoid filter. 
  • Buna-N diaphragm with self-cleaning 90 mesh (200 micron) pilot water filter and captive spring. 
  • Operates in low-flow and Xerigation applications when the RBY filter is installed upstream. 
  • 1.25" (3,2 cm) stainless steel phillips head screws. 
  • Accepts latching solenoid for use with Rain Bird battery-operated controllers.
    • Double-filtered pilot-flow design for maximum reliability.
    • Balanced-pressure diaphragm for long life.
    • External bleed to manually flush system of dirt and debris during installation and system start-up.
    • Internal bleed for spray-free manual operation.
    • Energy-efficient, low-power encapsulated solenoid with captured plunger and 90-mesh (200 micron) solenoid filter.
    • Buna-N diaphragm with self-cleaning 90 mesh (200 micron) pilot water filter and captive spring.
    • Operates in low-flow and Xerigation™ applications when the RBY filter is installed upstream.
    • 1.25" (3,2 cm) stainless steel phillips head screws.
    • Accepts latching solenoid for use with Rain Bird battery-operated controllers.
    • Available as:
      • 3/4" (20/27) and 1" (26/34) standard in-line configuration.
      • 1" (26/34) Slip-by-Slip (SS) configuration for low cost, solvent-weld installations.
      • 1" (26/34) Angle (A) configurations for flexible installations especially when submains are deep.
      • 1" (26/34) Male-by-Male (MM) thread configuration for quick and easy manifolding.
      • 1" (26/34) Male-by-Barb (MB) and 1" Male-by-1.25" Barb male thread inlet by barb outlet configuration for installation with poly pipe.
    • Unique, easy-to-turn patented pressure assisted flow control mechanism (DVF models only).
    Specifications
    • Pressure: 15 to 150 psi (1,0 to 10,4 bar)
    • 075-DV Flow: 0.2 to 22 GPM (0,05 to 5,0 m3/h; 0,01 to 1,39 l/s). For flows below 3 GPM (0,75 m3/h; 0,21 l/s) or any Xerigation™ application, use RBY-075-200MX Filter installed upstream.
    • 100-DV Flow): 0.2 to 40 GPM (0,05 to 9,08 m3/h; 0,01 to 2,52 l/s). For flows below 3 GPM (0,75 m3/h; 0,21 l/s) or any Xerigation™ application, use RBY-100-200MX Filter installed upstream.
    • 100-DVF Flow (non-union): 0.2 to 40 gpm (0,75 m3/h; 0,21 l/s); for flows below 3 gpm or any Xerigation application, use RBY-100-200MX Filter installed upstream.
    • Temperature: Up to 110°F (43°C)
    • Ambient air temperature: Up to 125°F (52°C)
    • 24 VAC 50/60 Hz (cycles per second) solenoid power requirement:
    • 0.30 A (7.2 VA) inrush current; 0.23 A (5.5 VA) holding current
    • Solenoid coil resistance: 38 Ohms

    Dimensions:

    • Height: 4 1/2" (11,4 cm)
    • Height (Angle): 5 1/2" (14 cm)
    • Width: 3 1/3" (8,4 cm)
    • Length: 4 3/8" (11,1 cm)
    • Length (Angle): 3 3/4" (9,5 cm)
    • Length (MM): 5 3/8" (13,6 cm)
    • Length (MB): 5 3/4" (14,6 cm)

     

     

     

     

    Rain Bird Valves

    Rain Bird JTV/JTVF Valves •Rain Bird ASVF Valves •Rain Bird PGA Valves •Rain Bird PEB-PESB Valves •Rain Bird GB Valves •Rain Bird EFB Valves •Rain Bird Quick Coupling Valves

    Other Brands of Valves

    Irritrol Valves • Toro Valves •Hunter Valves