Rain Bird PEB/PESB Series Valves

• Durable glass-filled nylon construction with nylon-reinforced rubber diaphragm for long life and reliable performance.
• Globe configuration.
• Normally closed, forward flow design.
• Slow closing to prevent water hammer and subsequent system damage.
• Low flow capability for a wide range of applications.
• One-piece solenoid design with captured plunger and spring for easy servicing. Prevents loss of parts during field service.
• Flow control handle adjusts water flows as needed.
• Manual internal bleed manually operates the valve without allowing water into the valve box; allows pressure regulator to be adjusted without turning the valve on at the controller first.
• Manual external bleed permits flushing debris from the system. Recommended for system start up and after repairs.
• Stainless steel studs molded into the body. Bonnet can be attached and removed more easily and more often without damaging threads.
• Nylon scrubber scrapes a stainless steel screen to clean and break down grit and plant material. Prevents debris build-up and clogging (PESB Series only).

• Pressure: 20 to 200 psi (1,4 to 13,8 bar)
• Flow without PRS-D option: 0.25 to 200 GPM 
  (0,06 to 45 m3/h; 0,02 to 12,60 l/s)
• Flow with PRS-D option: 5 to 200 GPM 
  (1,14 to 45 m3/h; 0,32 to 12,60 l/s)
• Temperature: Up to 150°F (66°C)
• 24 VAC 50/60 Hz (cycles per second) solenoid power requirement:
  • 0.41 A (9.8 VA) inrush curren
  • 0.28 A (6.7 VA) holding current
• Solenoid coil resistance: 24 Ohms, nominal

Options

• Accommodates optional, field-installed PRS-D pressure regulating module to ensure optimum sprinkler performance.
• Accepts latching solenoid for use with Rain Bird battery-operated controllers.
• Optional purple flow control handle for non-potable water applications PEB-NP-HAN1 (1"); PEB-NP-HAN2 (1 1/2" and 2").

Dimensions

• 100-PEB: 
  6 1/2" x 4" x 4" 
  (16,5 cm) x (10,2 cm) x (10,2 cm)
• 150-PEB: 
  8" x 6" x 6" 
  (20,3 cm) x (15,2 cm) x (15,2 cm) 
• 200-PEB: 
  8" x 6" x 6"
  (20,3 cm) x (15,2 cm) x (15,2 cm)
  
  Note: The PRS-D option adds 2" (5,1 cm) to the valve height.