Commercial Level Control for Battery-Operated Systems The TBOS-II battery-operated line of buriable irrigation controllers allows the use of automatic irrigation in challenging areas where AC power is not available. Its water saving programming features maximize water efficiency by letting you build highly-customized programs.With seven advanced programming features, the TBOS-II cuts setup time and eliminates repeat trips to the controller, resulting in water-efficient programs and lower operating expenses.
Seasonal Adjust: Automatically adjusts station run times for each month
Master Valve: Extra support for stations that require a back-up to minimize water leaks or need extra water pressure
Time-Saving Programming
Review Programs: Automatically verifies if the system is correctly programmed
Programming Templates: Save commonly-used programs as a template that can be transferred to other controllers
Test All Valves: Automatically tests if the system is correctly programmed and wired
Contractor Default Program: Save a customized default program that can be automatically restored at a later date
Naming Stations: Identify valves and their function without turning on the system programs
Flexible Programming
Run-time from 1 minute to 12 hours in 1-minute increments
Basic programming includes 3 independent programs with flexible days cycles including custom even, odd, odd-31 and 1-6 day program cycles for maximum flexibility
8 start times per program per day
Independent station operation allows simultaneous start times or sequential start times based on system hydraulic capacity
Easy to Use Interface
Battery indicator reports battery status in the TBOS Field Transmitter
The TBOS field transmitter has a large Liquid Crystal Display (LCD) with self-explanatory function icons. Each function is indicated by an easy-to-understand symbol
The 7-key keypad is equipped with a "beep" sound to confirm that a key has been pressed for fast and sure programming
One TBOS field transmitter programs an unlimited number of TBOS Control Modules
Field transmitter and control module have external infrared connectors for easy plug-in
It is possible to transmit information even if the module is under water
Valve Compatibility
TBOS potted latching solenoid is compatible with all Rain Bird valves in the DV, DVF, ASVF, PGA, PEB, PESB, GB, EFB-CP, BPE and BPES series
The TBOS solenoid adapters will adapt the potted latching solenoid for use in retrofit applications with non-Rain Bird valves such as Irritrol™ (Hardie/Richdel) and Buckner™ valves or Champion™ and Superior™ valve actuators
Three-year trade warranty
SPECIFICATIONS
TBOS-II Control Module
Available in 4 models: 1, 2, 4 and 6stations.
Operates one valve per station.
Station timing: 1 minute to 12 hours in 1-minute increments with a 365-day calendar. Stations can be assigned to multiple programs.
Active sensor connection accommodates Rain Bird™ RSD-BEx Rain Sensor
Operates with only one 9V alkaline battery (Energizer™ and Duracell™ are recommended) type 6 AM6 (international standard) or 6LR61 (European standard); battery not included.
Battery life is approximately one year with a high-quality 9V alkaline battery.
IP-68 rated waterproof case for reliable operation under water
Control Module Dimensions:
Width: 3.8" (9,5 cm)
Height: 5.1" (13,0 cm)
Depth: 2" (5,3 cm)
Weight: 17.64 ounces (500g)
Maximum Wire run between the module and solenoid:
Wire Size (AWG)
Maximum Distance
18 AWG (0.75 mm2)
32 ft (10 m)
16 AWG (1.5 mm2)
100 ft (30 m)
C-Tick Approved
TBOS-II Field Transmitter
Field Transmitter required for programming control module.
Field Transmitter Dimensions:
Width: 2.8" (7,0 cm)
Height: 6.3" (16,0 cm)
Depth: 1.2" (3,0 cm)
Weight: 8.81 ounces (250g)
Operating temperature: 14° to 149°F (-10° to 65°C)
C-Tick approved
TBOS-II Potted Latching Solenoid
Two 18 gauge (0,75mm2) wires are supplied: 23.6 inches (60 cm) long.