Skip to content

Hunter I-60 Rotors

Facilities with wide expanses of turf require rotors that can cover great distances.
But, the farther the rotors are spread apart, the higher the pressure needs to be to cover the throw. With municipal water supplies, more often than not, the pressure is too low for the rotors to work effectively. Instead of the expense of installing a pump to get the pressure up to an operational level, Hunter offers you a more efficient (cost and performance) way.
The I-60 lets you space rotors far enough apart, as is desirable in a large landscape such as a city park or community sports complex. Because it is designed to operate under lower pressure, it's a rotor that makes good economic sense. And, since it uses less water to run, the I-60 also eliminates the need to install larger pipe (another savings for the budget conscious).
FEATURES
  • Model Stainless Riser: 4 in.
  • Exclusive Precision Distribution Control
  • Standard factory installed nozzle: #13
  • 1-60-ADS ar setting: 40-360 degrees
  • 1-60-36S ar setting: Full-Circle only
  • Nozzle choices: 6
  • Nozzle range: #7 to #20
  • Factory installed rubber cover
  • Through-the-top arc adjustment
  • Quick check arc mechanism
  • Color coded Nozzles
  • Optional reclaimed water ID
  • Drain check valve (up to 10' of elevation)
I-60 MODELS
I-60 ADS - Adjustable arc (40 - 360 deg.)
I-60 36S - Full circle

DIMENSIONS
• Pop-up height: 3 in. (8 cm)
• Overall height: 8 3/8 in. (21 cm)
• Female inlet: 1 in. NPT or BSP
• Exposed diameter: 1 3/4 in. (4.45 cm)

OPERATING SPECIFICATIONS
I-60 ADS
• Discharge rate: 6.5 to 20.4 GPM (1.48 to 4.63 m3/hr; 24.6 to 77.2 l/min)
• Radius: 50 ft. to 66 ft. (15.2 to 20.1 m)
• Recommended pressure range: 40 to 60 PSI (2.8 to 4.1 bars; 275 to 413 kPa)
• Operating pressure range: 20 to 100 PSI (1.4 to 6.9 bars; 137 to 689 kPa)
• Precipitation rates: approximately .29 in. to .52 in. (7 mm to 13 mm) per hour
• Nozzle trajectory: 25°

I-60 36S
• Discharge rate: 6.5 to 20.8 GPM (1.48 to 4.72 m3/hr; 24.6 to 78.7 l/min)
• Radius: 51 ft. to 67 ft. (15.5 to 20.4 m)
• Recommended pressure range: 40 to 60 PSI (2.8 to 4.1 bars; 275 to 413 kPa)
• Operating pressure range: 20 to 100 PSI (1.4 to 6.9 bars; 137 to 689 kPa)
• Precipitation rates: approximately .25 in. to .55 in. (6 mm to 14 mm) per hour
• Nozzle trajectory: 25 deg.

Note: To ensure optimum nozzle performance, the rotor should be operated in the "Recommended pressure range." The sprinkler will work normally when used in the "Operating pressure range", but nozzle performance may be reduced.

OPTIONS AVAILABLE
• Reclaimed water cover
• Factory-installed nozzles


Hunter Sprinkler Rotors

MP Sprinkler RotorsPGJ Sprinkler RotorsSRM Sprinkler RotorsPGP Sprinkler RotorsPGP Ultra Sprinkler RotorsI-20 Sprinkler RotorsI-25 Sprinkler RotorsI-35 Sprinkler RotorsI-40 Sprinkler RotorsI-90 Sprinkler RotorsSprinkler Rotor Accessories



Other Brands of Sprinkler Rotors

Rain Bird Sprinkler RotorsIrritrol Sprinkler RotorsToro Sprinkler RotorsK-Rain Sprinkler Rotors